当前位置:首页>新闻资讯
行业资讯
  • 灭菌器的使用方法
  • 本站编辑:网站管理员发布日期:2020-03-06 10:31:32浏览次数:108

 医院、生物、医药、科研等单位往往需要保持洁净无菌的环境,所以这些单位是离不开消毒灭菌设备的。较为常见的灭菌器是主要用来对器皿器具进行消毒。它在使用的时候,主要分为两大部分:保温和降温。

 
  保温的过程就是灭菌的过程。温度不能低于规定值,一般在120-122度之间,保温半小时。但也不可以将温度设置太高。因为在保温过程中温度很高,所以操作消毒灭菌设备时要带上手套,以免烫伤。在使用的时候,需要盯着指针参数,看着时间,所以人不可走开。想要在保温过程中保持恒定温度,可以对加热或排气进行微调。
 
灭菌器的正确使用方式
 
  保温时间到了要开始降温。一般直接关闭加热开关即可。一定要等到温度讲到40度以下才能打开灭菌盖。但是如果急用灭菌后的器皿器具,可以将排气孔微开。用湿毛巾敷在盖子上,这个办法可以做到快速降温。
Hospitals, biological, pharmaceutical, scientific research and other units often need to maintain a clean and sterile environment, so these units are inseparable from sterilization equipment. The more common sterilizer is mainly used to sterilize utensils. When it is in use, it is divided into two major parts: Insulation and cooling. The process of heat preservation is the process of sterilization. The temperature can not be lower than the specified value, generally between 120-122 degrees, keep warm for half an hour. But don't set the temperature too high. Because of the high temperature in the insulation process, so the operation of sterilization equipment to wear gloves, so as not to burn. In the use of time, need to look at the pointer parameters, look at the time, so people can not go away. To maintain a constant temperature during insulation, fine-tune the heating or exhaust. The correct way to use sterilizer, insulation time to start cooling. General directly turn off the heating switch can be. Do not open the sterilizer until the temperature is below 40 degrees. However, if the immediate use of sterilized utensils, you can slightly open the vent. Apply a wet towel to the LID. This will cool you down quickly.